The maintenance method of the washing machine dehydrati […]
The maintenance method of the washing machine dehydration motor short circuit can only be replaced by a motor. The washing machine motor is generally about seven to eighty dollars. If you need to open the coil and rewind it, the cost will be higher than this, so it is better to replace it with a new washing machine motor.
The method of changing the motor of the washing machine is as follows:
If the motor of the washing machine fails, you should first observe and remember the wiring position. It is best to use the wiring diagram below the note, then remove the back cover screw first, remove the back cover, and then fix the wires together. Armored harness with stripped, disconnected motor wiring. Remove the three hex bolts and remove the bracket so that the V-belt on the pulley of the motor and the wires secured to the seal box can be removed. Finally, loosen the lock nut, loosen the bolt that the pulley is fixed to the motor shaft, and take out the motor. When replacing the motor, the sequence is the reverse of when disassembling. However, it should be noted that 1 tighten the bolt of the pulley to the hole of the motor shaft. 2 After adjusting the tension of the V-belt, tighten the motor mounting bolt. 3 When adjusting the belt tension, press the belt by hand. The distance is equivalent to one finger. , about 10 mm.