The application of automatic dispensers is more and more extensive

Update:21-12-2018
Summary:

The application of automatic dispensers is more and mor […]

The application of automatic dispensers is more and more extensive. The motors used on the equipment are mainly stepper motors and stepper drives. If the speed requirements are high, some use closed loop for stepping, stepper motor and stepper motor driver. The best thing to do is to have more in Shenzhen. So how is the motor maintained in daily use? How can I make the dispenser less malfunctioning? Next, let the engineers of Alesi Technology Co., Ltd. share with you how the motor is maintained.

Professional maintenance process for the motor on the automatic dispenser machine:

The use environment should be kept dry frequently, the surface of the motor should be kept clean, and the air inlet should not be obstructed by dust or fibers.

When the thermal protection of the motor continuously occurs, it should be ascertained that the fault is from the motor or the overload or the setting value of the protection device is too low, and the fault can be put into operation.

The motor should be well lubricated during operation. The general motor runs for about 5,000 hours, that is, the grease should be replenished or replaced. When the bearing is overheated or deteriorated during operation, the hydraulic pressure is changed in time. When replacing the grease, the old oil should be removed, as well as the oil sump for the bearing and bearing cap.